No Touch Forehead Thermometer Infrared IR Baby Body Skin Fever Temporal Measurement

• Precise non-contact measurements
• Built-in laser pointer
• User selectable C or F
• Automatic selection range and Display Resolution 0.1C(0.1F)
• Automatic Data Hold & Auto Power off
• Set Alarm value (the alarm threshold default value is 36.5C/ 97.7 F) : turn on unit and press "MODE" button 3 seconds, LCD display "F1", Re-press "MODE" to enter 36.5 (default alarm setting), increase or decrease value by press up or down arrow, press measurement rigger to finish setting.
• Selection for buzze: turn on the unit and press MODE" button 3 seconds, LCD display "F3", Re-press "MODE" for setting. Press up or down arrow for selection "ON" or "OFF" mode. Press measurement rigger to finish setting.
• Selection for body or ambient temperature: Turn on the unit and press "MODE" button 3 seconds to enter "F1". Access "F4" by choosing up arrow. Re-press "MODE" for setting "BODY" or "SURF" function, press measurement rigger to finish setting.
• Backlight LCD Display
• Memorization of the last 32 measurements

Use:

• Install 3V battery.
• For the first use or when inserting new batteries, wait 10 minutes for the warm-up of the apparatus
• If the device is not used for a long time once you turn it on again, the device will test the room temperature first and will delay turning on for one two seconds.
• Aim towards the forehead, from a distance of 5cm(2 in), press the measuring key, the temperature is displayed immediately. Marking sure of there is no hair , perspiration, cosmetic or cap covered on the forehead.
• When the room temperature is significant difference, or there is perspiration on the forehead. You can take the temperature behind the ear lobe. Making sure there on hair, perspiration, cosmetic or cap covered.

• Press measurement rigger and turn on the device, screen will be displayed, after two beeps, it will display value of last reading and be ready for measurement.
• Make sure the thermometer under body mode. Keep the distance at 5cm to 15cm from upper eyebrows to the probe. Press measurement button and when it gives a "beep" measurement is finished and value will be displayed.
• If measurement value is exceeding alarm value (Defaulted value is 38C). It gives "beep beep beep" as a indication.
• After measurement, if thermometer is idle in 15 seconds, it will display "OFF" and beep and shut off automatically.

Advice:

• The protective glass over the lens is the most important and fragile part of the thermometer, please take great care of it. Clean the glass with cotton fabric, wet with water or 70C alcohol.
• Do not use other batteries than mentioned batteries, do not recharge non rechargeable batteries.
• Do not expose the thermometer to sunlight or water.